Allied Telesis AR700 - Manual (Page 16)

Features in 281-01 16
Version 281-01
C613-10482-00 REV A
CR00013049 IPv6 3 The router or switch sometimes rebooted when it processed a large number of
multicast routes that were created as the result of receiving a large amount of
data from more than 500 multicast groups.
This issue has been resolved.
Y Y Y Y Y - - Y Y Y
CR00013085 OSPF 3 A user can configure a range on an OSPF ABR, so that the ABR aggregates the
network advertisements from one area into another area in the form of summary
LSAs. However, networks advertised into a transit area should not be aggregated
into summary LSAs. Previously, the router or switch advertised aggregated
summary LSAs into transit areas when a range had been configured.
This issue has been resolved. When the router or switch is advertising into a
transit area, it ignores any configured range.
Y Y Y Y Y Y Y Y Y Y
CR00013093 Switch 3 When traffic on a port was mirrored and that port had a learn limit set, packets
from the CPU (such as ARP replies and ICMP replies) were not always mirrored.
This issue has been resolved.
- - - Y Y Y Y - - -
CR00013190 Core 3 If a AT-8624PoE switch had a sticky fan, the fan constantly toggled between
running at full speed and slowing down. This meant that the fan continuously
generated alarms.
This issue has been resolved. If the fan reports an error more than 3 times in an
hour, it now remains at its maximum speed setting.
- - - - - Y - - - -
CR00013202 Core 3 On the AT-8624PoE switch, a fan fault alarm was not generated when the fan
speed dropped to 70% of the expected speed.
This issue has been resolved. When the speed drops to 70% or less, a alarm is
now generated.
- - - - - Y - - - -
CR Module Level Description AR4
0
0
AR7
x
5
AR7
50S / AR770S
Ra
pi
er
i
AT
-8
8
0
0
AT
-8
6
0
0
A
T-
8
7
00XL
A
T-
8
9
48 / x900-
48
AT
-9
9
0
0
AT
-9
8
0
0