CEMB USA C71 (A) - Manual (Page 10)

15
30
15
30
15
30
1
2
I 293 - 10 GB
5.6 - Split function (hidden weight)
The SPLIT function is used to position the adhesive weights behind the wheel spokes so that they are not visible. Input
the wheel dimensions and do a spin.
- Place the wheel in the outside unbalance correction position.
- Set one of the top spokes to 12 o’clock.
- Press
Indication of fi rst positioning detected
- Follow the UP/DOWN indication of the arrows and set the second top
spoke to 12 o’clock position.
- Press
- Place the fi rst Split unbalance in correction position 1
- Correction position 1 (indicator 1)
- Correction position 2 (indicator 2)
N.B.: If errors 24/25/26 are displayed, see the table on page 17 and
repeat the split function with greater care.
To return to normal unbalance display, press any button.
To carry out a new spin, press the button START .