CEMB USA C72 (B) User Manual

Page 9

I 0307_0308 -

4.3 - AUTOMATIC DISTANCE AND DIAMETER GAUGE

This gauge allows measurement of the distance of the wheel from the machine and the wheel diameter at
the point of application of the counterweight.
It also allows correct positioning of the counterweights on the inside by using the specifi c function which
allows reading the position used for the measurement within the rim.
The gauge can only be used with the counterweight pincers mounted.

4.4 - AUTOMATIC WIDTH GAUGE (OPTIONAL)

Width gauging is through a SONAR device which measures the distance of the wheel without mechanical
contact, merely by closing the guard and each time a valid measurement has been made with gauge

DISTANCE AND DIAMETER GAUGE

4.5 - AUTOMATIC WHEEL POSITIONING

At the end of the spin, the wheel is positioned according to the unbalance on the outside or else
according to the static unbalance (when selected).
Precision is ± 20° for wheels up to 25 kg. in weight. Positioning is automatically disenabled for wheels
of less than 13” in diameter.