Hunter 99179, 99180, 99181 Original Accessory Control and Canopy Kit - Manual (Page 6)

M0093-01 • 02/03/14
1.888.830.1326
6
CONNECT WIRES FROM RECEIVER TO WIRES FROM OUTLET BOX - Using an orange wire connector
connect the black wire (ungrounded) from the ceiling to the black wire from the receiver (marked “live
in”). Connect the white wire (grounded) from the ceiling to the white wire from the receiver (marked
“neutral in”).
AFTER ALL WIRES ARE CONNECTED and secured with wire connectors, re-install the canopy.
FR
OM R
ECEIVER
FRO
M CEILING
black (live in)
white (neutral in) white (grounded)
black (ungrounded)
Wiring
CONNECT WIRES FROM RECEIVER TO FAN - Using the blue wire connectors connect the white wire from
the receiver (marked “common out”) to the white wire from fan. Connect the black wire from the receiver
(marked “fan out”) to the black wire from the fan. Connect the blue wire from the receiver (marked ”light
out”) to the blue wire (or possibly black with white stripe) from the fan.
If you’re uncertain about wire colors or connections, please contact a qualified electrician.
FR
OM RECEIVER
white
black
blue
white (common out)
black (fan out)
blue (light out)
FROM FAN