Which assembly method will i use – Hunter 99179, 99180, 99181 Original Accessory Control and Canopy Kit User Manual
Page 3
M0093-01 • 02/03/14
1.888.830.1326
3
If your fan is already installed and the
canopy is held by two screws near the
downrod as shown, follow the TYPE-B
ASSEMBLY INSTRUCTIONS on page 4.
If your fan has not been installed, follow
the TYPE-A ASSEMBLY INSTRUCTIONS
on page 4.
WHICH ASSEMBLY METHOD WILL I USE?
Canopy
Screw
If your fan is already installed and the
canopy is held by three screws near
the ceiling as shown, follow TYPE-C
ASSEMBLY INSTRUCTIONS on page 5.
Canopy
Screw