Hunter 28129 Four-Light White Straight Arm Fitter - Manual (Page 6)

6
43558-01 • 05/18/09 • Hunter Fan Company
1. Uninstall the two attachment screws from the switch housing cover.
2. Remove the plug or screw from the center of the switch housing cover.
NOTE: Save the plug button and switch housing cap should you choose to
remove the light fixture in the future.
3. Thread the switch housing cover onto the wires from the light kit. Align the
large ends of the keyholes in the light kit with the screw holes in the switch
housing cover. Install the nut and washer onto the threaded rod from the
light kit to secure the switch housing cover.
4. You have already removed the decorative pendant cover from the bottom
of the light kit.
Finish attaching the light kit to the switch housing cover using the two
attachment screws removed from the lower switch housing and the lock
washers on the red tag. Partially install the screws into the light kit and the
housing. Rotate the housing counterclockwise until the screws are locked
into the narrow ends of the keyhole slots. Securely tighten the two screws.
WARNING: Improper installation could cause the light fixture to fall, or
result in electrical shock or personal injury. Switch
Housing
Cover
Plug
Attachment
Screw
Non-Removable Switch
Housing
Steps 1-2
Washer
Threaded
Rod
Nut
Step 3
Wires
and Wire
connectors
Installing the Light Kit on Fans With Non-Removable Switch Housing