Hunter 99093, 99094 4-Light Fitter With Glass - Manual (Page 9)

MA008-01 • 08/15/13
1.888.830.1326
9
Lift the light kit assembly up so
that the screw holes in the lower
switch housing line up with the
holes in the upper switch housing.
Install the switch housing screws
and tighten securely.
TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)
Using the single pin connectors,
connect the black or blue wire
from the fan to the black wire
from the light kit. Connect the
white wire from the fan to the
white wire from the light kit.
4
Installing the pull chain
pendant - Attach the pull chain
pendant to the end of the
short chains coming from the
switch housing and the light kit.
ON
Turn
Pow
er
Turn on power. Your
installation is complete!
8 9
Installing the bulb - Install a
bulb into each socket. When
necessary, replace bulbs with
bulbs of same type and wattage.
7
To install the shade, first loosen
the thumb screws. Raise the
shade to the light fixture. Tighten
all thumbscrews securely.
Thumb Screw
Shade
6
Upper
Switch
Housing
5