Hunter 99093, 99094 4-Light Fitter With Glass - Manual (Page 5)

MA008-01 • 08/15/13
1.888.830.1326
5
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Installing the bulb - Install a bulb into each
socket. When necessary, replace bulbs with
bulbs of same type and wattage.
To install the shade, first loosen the thumb
screws. Raise the shade to the light fixture.
Tighten all thumbscrews securely.
Thumb Screw
Shade
ON
Turn
Pow
er
Turn on power. Your
installation is complete!
6 5
7 8