Turn p ow er, Ceiling bracket – Hunter 53078 42 Beacon Hill User Manual
Page 5
www.HunterFan.com
1.888.830.1326
Ceiling Bracket
OFF
Make sure all four (4) bumpers
are still attached.
For angled ceilings, point
opening toward peak.
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
If you are unable to do this,
call Technical Support at
1-888-830-1326.
Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes
in support structure to aid
in securing ceiling bracket
with hardware found in
the hardware bag.
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
Turn P
ow
er
5
M0042-01 • 01/29/14 • © Hunter Fan Company
- 53082 42 Beacon Hill 53079 42 Beacon Hill 53080 42 Beacon Hill 53081 42 Beacon Hill 52105 42 Builder Small Room 52106 42 Builder Small Room 52107 42 Builder Small Room 52115 46 Atkinson 53098 52 Winslow 53097 52 Winslow 53028 52 Sedgefield 52077 52 Landry 52076 52 Landry 53051 52 Conway 53052 52 Conway 53236 52 Builder Plus 52072 52 Channing 52070 52 Channing 52071 52 Channing 53225 52 Banbury 52058 52 Belmor 52060 52 Belmor 52059 52 Belmor 53237 52 Builder Plus 53238 52 Builder Plus