You’re done, Light kit (continued), See next page for fan operation instructions – Hunter 53078 42 Beacon Hill User Manual
Page 15
www.HunterFan.com
1.888.830.1326
Light Kit (continued)
CONGRATULATIONS!
YOU’RE DONE!
Install a bulb into each of
the sockets. When necessary,
replace with bulbs of the same
type and wattage.
Note: Glass shade style and number of lights may vary.
See next page for fan
operation instructions.
Connect the appropriate pull
chain pendant to each of the
short chains coming from the
switch housing.
To install the shade, first loosen
the thumbscrews. Raise the
shade to the light fixture. Tighten
all thumbscrews securely.
Shade
Thumbscrew
Note: In compliance with US federal energy regulations, this ceiling fan
contains a device that restricts its light output. Exceeding the wattage
limit marked on the MAX wattage sticker affixed to the light socket(s)
may result in fire hazard or improper operation.
Fan
Pull
Chain
Light
Pull
Chain
Bulb
15
M0042-01 • 01/29/14 • © Hunter Fan Company
- 53082 42 Beacon Hill 53079 42 Beacon Hill 53080 42 Beacon Hill 53081 42 Beacon Hill 52105 42 Builder Small Room 52106 42 Builder Small Room 52107 42 Builder Small Room 52115 46 Atkinson 53098 52 Winslow 53097 52 Winslow 53028 52 Sedgefield 52077 52 Landry 52076 52 Landry 53051 52 Conway 53052 52 Conway 53236 52 Builder Plus 52072 52 Channing 52070 52 Channing 52071 52 Channing 53225 52 Banbury 52058 52 Belmor 52060 52 Belmor 52059 52 Belmor 53237 52 Builder Plus 53238 52 Builder Plus