Blades – Hunter 53078 42 Beacon Hill User Manual
Page 12
www.HunterFan.com
1.888.830.1326
Blades
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
12
Insert grommets found in the hardware
bag into the holes in the blades, then
secure each blade to a blade iron with
screws found in the hardware bag.
Remember the screws that
you kept after removing the
shipping blocks (page 6)? You
need them for this step.
Lightly attach the blade irons to the
motor with the blade iron armature
screws, then securely tighten after both
screws are attached.
12
M0042-01 • 01/29/14 • © Hunter Fan Company
This manual is related to the following products:
- 53082 42 Beacon Hill 53079 42 Beacon Hill 53080 42 Beacon Hill 53081 42 Beacon Hill 52105 42 Builder Small Room 52106 42 Builder Small Room 52107 42 Builder Small Room 52115 46 Atkinson 53098 52 Winslow 53097 52 Winslow 53028 52 Sedgefield 52077 52 Landry 52076 52 Landry 53051 52 Conway 53052 52 Conway 53236 52 Builder Plus 52072 52 Channing 52070 52 Channing 52071 52 Channing 53225 52 Banbury 52058 52 Belmor 52060 52 Belmor 52059 52 Belmor 53237 52 Builder Plus 53238 52 Builder Plus