Asus DSBV-DX/C - Manual (Page 62)

2-40 Chapter 2: Hardware information
12. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V1)
These connectors are for SSI power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
• For a fully configured system, we recommend that you use an SSI
12 V-compliant power supply unit (PSU) for LGA771-socket Intel ® Xeon
Dual Core processors (Bensley platform).
• DO NOT forget to connect the 24+8-pin power plugs; otherwise, the system
will not boot up.
• Use of a PSU with a higher power output is recommended when configuring
a system with more power consuming devices. The system may become
unstable or may not boot up if the power is inadequate.
• You must install a PSU with a higher power rating if you intend to install
additional devices.
DSBV
-D
X
DSBV-DX Series ATX power connectors
8-PIN
GND
12V1
GND
12V1
GND
12V2
GND
12V2
24-PIN Power Connector
ATXPWR1
ATX12V1
+3 V
olts
+3 V
olts
Ground +5 V
olts
+5 V
olts
Ground Ground Power OK +5V Standby +12 V
olts
-5 V
olts
+5 V
olts
+3 V
olts
-12 V
olts
Ground Ground Ground PSON# Ground
+5 V
olts
+12 V
olts
+3 V
olts
+5 V
olts
Ground