Asus DSBV-DX/C - Manual (Page 138)

5-24 Chapter 5: RAID configuration
5.2.6 Checking the drives for data consistency
You can check and verify the accuracy of data redundancy in the selected logical
drive. The utility can automatically detect and/or detect and correct any differences
in data redundancy depending on the selected option in the Objects > Adapter
menu.
The Check Consistency command is available only for logical drives included
in a RAID 1 set.
Using the Check Consistency
To check data consistency using the Check Consistency command:
1. From the Management Menu, select Check Consistency, then press
.
2. The screen displays the available RAID set(s) and prompts you to select the
logical drive to check. Press the to select the logical drive from
the Logical Drive selection, then press .