Asus DSBV-DX/C - Manual (Page 40)

2-18 Chapter 2: Hardware information
2.4.3 Memory sparing technology
The Intel ® 5000V chipset supports the memory sparing technology. Refer to the
below sections:
Memory Sparing :
At configuration time, a DIMM rank is set aside to replace a defective DIMM rank.
When the error rate for a failing DIMM rank reaches a pre-determined threshold,
the memory sparing function will issue an interrupt and initiate a spare copy. At the
completion of the copy, the failing DIMM rank is disabled and the “spared” DIMM
rank will be used in its place. Refer to 4.4.2 Chipset Configuration and configure
the options of Branch 0 Rank Sparing to enable the memory sparing functions.
And the default BIOS setting is disabled.
• The DIMM rank with the largest size will be assigned as spare rank. Data
can only be copied from a smaller sized rank to a larger sized one.
• A DIMM can contain only one or two ranks. To support sparing function, a
DIMM channel should contain at least two ranks.
• When sparing function is enabled, the usable memory size will reduce then
size of the spare ranks.
Channel 0 Channel 1
DIMM_00
(2048MB/2 Ranks)
DIMM_10
(2048MB/2 Ranks)
Rank 0
(1024 MB)
Rank 1
(1024 MB)
Rank 0
(1024 MB)
Rank 1
(1024 MB)
Sparing V V
Memory space 1024 MB 1024 MB
Total Memory 2048 MB
The following tables show memory configurrations with Memory Sparing function in
Branch 0.
One DIMM per channel (Dual ranks)