Abocom 802.11b/g Portable Router WAP2102 User Manual
Page 23
20
Client Mode
Client Mode Settings
Alias Name
Display the name of this device.
Band
You can choose one mode of the following you need.
~ 2.4GHz (B): 802.11b supported rate only.
~ 2.4GHz (G): 802.11g supported rate only.
~ 2.4GHz (B+G): 802.11b supported rate and 802.11g supported
rate. The default is 2.4GHz (B+G) mode.
SSID
The SSID differentiates one WLAN from another; therefore, all
access points and all devices attempting to connect to a specific
WLAN must use the same SSID. It is case-sensitive and must not
exceed 32 characters. A device will not be permitted to join the
BSS unless it can provide the unique SSID. A SSID is also
referred to as a network name because essentially it is a name that
identifies a wireless network.
Security
Click Setup button to enter the Wireless Security Setup page.
Authentication: Select an Authentication from the pull-down list
including Open system or Shared Key, Open System, Shared
Key, WPA-PSK and WPA2-PSK.
Encryption: Select either None or WEP.
Apply Changes: Press to save the new settings on the screen.
Reset: Press to discard the data you have entered since last time
you press Apply Changes.