Abocom 802.11b/g Portable Router WAP2102 User Manual

Page 18

information.
Delete Selected: To delete clients from access to this Router, you may
firstly check the Select checkbox next to the MAC address and Comments,
and press Delete Selected.
Delete All: To delete all the clients from access to this Router, just press
Delete All without selecting the checkbox.
Reset: If you have made any selection, press Reset will clear all the select
mark.

WAN Port

Click Setup to enter the WAN Port Configuration screen.

WAN Access Type: Select the WAN access type (Static IP, DHCP, PPPoE
and PPTP) from the pull-down menu.
Attain DNS Automatically: Select to attain DNS automatically.
Set DNS Manually: Select to set DNS manually.
DNS1~3: Enter the DNS server IP address (es) provided by your ISP, or you
can specify your own preferred DNS server IP address(es).
DNS 1 and DNS 2 servers are optional. You can enter another DNS server’s
IP address as a backup. DNS 1 and DNS 2 servers will be used when the
DNS 1 server fails.
Clone MAC Address: Enter the MAC address that you wish to clone.
Respond to WAN Ping: Click to allow pinging from WAN side.
Save: Click to save and apply the current settings.
Reset: Click to clear and reset the current settings.
Close: click to exit the current settings.