Abocom 802.11b/g Portable Router WAP2102 - Manual (Page 20)

17
Reset: Click to resetore to the default values.
Note: You need to give your LAN PC clients a fixed/static IP address for
DMZ to work properly.
Remote
Management Click Setup to enter the Remote Management screen.
Enable Web Server Access via WAN: To permit remote access of the
Router, from outside the local network, select to enable. Otherwise, keep the
default setting, Disabled.
Port Number: Enter the port number that will be open to outside access.
Save: Click to save the current settings.
Reset: Click to restore to the default values.
URL Filter Click Setup to enter the URL Filtering screen.
Enable URL Filtering: Click to enable the URL filtering function.
URL Address: You can block websites with specific URL addresses.
Apply Changes: Click to save the current settings.
Reset: Click to clear the current settings.
Current Filter Table: Shows the current URL address status.
Delete Selected: Select the unwanted URL addresses and then click the
Delete Selected button to eliminate them.
Delete All: Click to delete all the URL addresses in the table.
Reset: Click to clear the current settings.