Reloop single auto cue – American Audio UCD-200 User Manual
Page 13
©
American Audio
®
- www.americanaudio.us - UCD-200 Instruction Manual Page 13
LIqUID CRYSTAL DISPLAY (LCD)
LCD DISPLAY (FIGURE 7)
34. CUE INDICATOR - This indicator will glow when the unit is in CUE mode and will flash every time
a new CUE POINT is set.
35. FOLDER DISPLAy -
This indicates which folder you are in.
36. TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (37).
As with the TIME METER (37), this bar is also dependent on the selected time function REMAIN,
ELAPSED, or TOTAL REMAIN. This bar will begin to flash when 15 seconds of a track remain and will
begin to rapidly flash when three seconds of a track remain. The flashing bar is a great visual reminder
a track is about to end. The flashing bar will function regardless of which time mode the unit is in.
37. TIME METER - These indicators will detail the current Minutes, Seconds, and Frames. The meter
will display either the elapse, remaining, or total remaining time of a track or the entire disc. The
display time will depend on the selected time function. The selected time function will be displayed
above the TIME METER as either TOTAL REMAINING, REMAINING TRAck TIME, OR ELApsEd
TRAck NAME.
38. BPM METER - This meter will display the BPM of the current track.
39. PITCH METER - This meter displays the pitch percentage being applied to playback by the
PITCH SLIDER (5). If the meter read zero regardless of the PITCH SLIDER'S (5) position, the PITCH
(8) function is not activated.
40. TEMPO LOCK - This will indicate the Tempo Lock function is active.
41. LOOP/RELOOP INDICATOR -
The LOOP indicator will appear when a loop is ready to be engaged.
The RELOOP indicator will flash when a loop is engaged.
42. AUTO CUE - This will indicate if the Auto Cue is on or off. Press and hold the SGL/CTN (12) for 1
sec. to turn the Auto Cue function on and off. The unit's Auto Cue function will automatically set the
cue point at the beginning of each track.
43. CHARACTER DISPLAy - This will display the name of the track and/or folder when an Mp3 disc
with compatiable ID3 tags is loaded into the unit.
44. TOTAL/REMAIN/ELAPSED INDICATOR -
when TOTAL REMAIN is indicated in the Lcd dIspLAy
(4) the time meter will show the total disc remaining time. when REMAIN is indicated the time meter
will show the current track's remaining time. when ELAPSED is indicated the time meter will show
the current track's elapsed time.
45. REPEAT INDICATOR - This indicates the unit is in repeat play mode, the unit will cONTINuE to
Figure 7
34
44
43
42
41
40
39
36
35
46
45
47
48
38
37
FOLDER
TRACK
M
TOTALREMAIN
S
F
PITCH
AUTO BPM
CD MP3
CUE
RELOOP
SINGLE
AUTO CUE