General functions and controls - player unit – American Audio UCD-200 User Manual

Page 11

American Audio

- www.americanaudio.us - UCD-200 Instruction Manual Page 11

GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT

Figure 6

Figure 5

PLAYER UNIT - FACE (FIGURE 5)

23. DRIVE 1 TRANSPORT TRAy - This tray is used to load and unload a compact disc into the drive
1 mechanism. The tray is opened and closed by pressing the DRIVE 1 OPEN/CLOSE BUTTON (25).
Never attempt to force the transport tray open or close when the power is turned off.
24. USB PORT - This is the USB port where you can insert a USB stick, USB SD Card reader, or com-
patiable external hard drive for playback.

VERy IMPORTANT: PlEASE SEE PAGE 7 FOR DETAIlS

REGARDING/USING USB DEVICES.
25. DRIVE 1 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and close
the drive 1 transport tray. NOTE: when a disc is already loaded in the transport tray, the tray will not
open unless the unit is in pause or cue mode.
26. POWER SWITCH - This switch is used to control the unit's main power. A red LED directly above
the power switch will glow to indicate main power is active.
27. DRIVE 2 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and close
the drive 2 transport tray. NOTE: when a disc is already loaded in the transport tray, the tray will not
open unless the unit is in pause or cue mode.
28. DRIVE 2 TRANSPORT TRAy - This tray is used to load and unload a compact disc into the drive
2 mechanism. The tray is opened and closed by pressing the DRIVE 2 OPEN/CLOSE BUTTON (27).
Never attempt to force the transport tray open or close when the power is turned off.

PLAYER UNIT - REAR (FIGURE 6)

29. DRIVE 1 AUDIO OUT R & L - These jacks send a left and right analog mono output signal. Use
these jacks to send standard audio to a mixer or receiver. The red colored jack represents the right
channel output and white jack represents the left channel's output.