Castle 30 Express User Manual

Page 7

Pull the Black Fence Knob toward you, dropping the Middle Fence into place.

Again, slide the panel to the right until it is pressed against the Right Stop.

Keep Your Fingers Away From the Clamping Beam.

Step on the Foot Pedal again and wait for the machine to complete its drilling

cycle.

Release the Foot Pedal.

You have just drilled the rear line of holes for a 12” panel

OR the middle row of a deeper panel.

Check to see that the holes are in satisfactory position and if necessary, make fine

adjustments to satisfy your specific line boring needs.

If you are drilling a Lower, then the Middle Fence should stay up and the panel

should be pushed all the way in to the Rear Fence.