Schreiber Chillers 1055 New - Manual (Page 40)

Factory default setting For PCO2 Controller: (1055AC/WC and 15MED)
Under Main Menu
CURRENT
STATUS
CURRENT ALARMS
USER SETTINGS
RUN HOURS
FACTORY SETTINGS
ALARM HISTORY
DATE AND TIME
SENSOR CALIBRATION
DIG-IN CALIBRATION
MANUAL CONTROL
CURRENT STATUS –
THESE ARE ONLY INFORMATION SCREENS – NOTHING CAN BE CHANGE
Running Status
Pumps: 1 2 yes
Comps: 2 no
TCON TCOFF
System Status
Discharge: Discharge temperature reading
Return #1: Return #1 temperature reading
Return #2: Return #2 temperature reading
Circuit #1 Status
Head Press: Head pressure reading circuit #1
CKT OK: Yes
Circuit #2 Status
Head Press: Head pressure reading circuit #2
CKT OK: Yes
Con. Fans Status
Fans are ON
Demand: __%
Speed: __Hz
System On/Off
Forward / Reverse
Pumps #1: OFF / ON #2: OFF / ON
Comps #1: OFF / ON #2: OFF / ON
CURRENT ALARMS
THIS SCREEN SHOWS ALARM FAULT CODE
USER SETTINGS
Setpoints – The customer can change this setting based on their requirement.
Discharge: 47.0
0
F
Hist: 1.5
0
F