MoTeC MDC - Manual (Page 3)

MoTeC MDC 1 Introduction
Introduction
The MoTeC Mitsubishi Diff Controller (MDC) is a direct replacement for the Active Centre Diff (ACD) controller in
the Mitsubishi EVO7 to EVO9.
The MDC also supports centre diff control on Active Yaw Control (AYC) equipped vehicles. However the yaw
control hardware is not used.
EVO4 and EVO5 are not supported as the AYC module in these vehicles uses a slightly different connector. These
vehicles could be rewired to suit the MDC, please contact MoTeC for details.
This manual covers the installation, configuration and functionality of the MDC.