MoTeC MDC - Manual (Page 14)

MoTeC MDC 12 Appendices
Appendices
Appendix A – Fault Codes
The MDC fault flags included in the CAN diagnostics are sent as a bit field (16 bit) with the following faults:
Bit 0 (0x0001 = 1) Bad Configuration (CRC failure)
Bit 1 (0x0002 = 2) Short circuit pump output
Bit 2 (0x0004 = 4) Hydraulic pressure sensor failure
Bit 3 (0x0008 = 8) Pump run time fault (pump could not achieve min pressure threshold)
The MDC diagnostic flags included in the CAN diagnostics are sent as a bit field (16 bit) with the following faults:
Bit 0 (0x0001 = 1) Steering sensor position corrected