DE-STA-CO 80RDM - Manual (Page 10)

11. OPTIONAL OUTPUT SHAFT PLUGS
INSTALLATION
A. Position the optional output shaft plug
(30) in the bore of housing (1) and tap
into place until flush with the housing
surface.
B. Position plug (29) in its bore of housing
(1) and tap into place until flush with the
housing surface.
12. LUBRICATION
A. Fill the cam chamber of housing (1)
(level with the sidewalls) with Mobilith
AW-2 grease.
B. Position the two plugs (32) in their
bores of housing (1) and tap into place
until flush with the housing surface.
9