BatteryMINDer 12248-A-ODY - Manual (Page 17)

BatteryMINDer © Model 12248-A-ODY
Rev. D-050509 Page 1 P/N VDC12248-A-ODY-MNL
and conditions, proceed to restart the charger by pressing
the Stop / Restart button and allow charger to begin charging
battery again. If battery is not defective it should be able to
be fully charged after being restarted. After sufficient time has
lapsed the
GREEN charge LED Indicator will blink confirming
when / if battery is now fully charged.
Note : If attempting to charge more than one battery at a
time it is very likely the charger will need to be restarted as
described in order to completely charge multiple batteries. We
do not recommend charging more than one battery at a time
without confirming the individual condition of each battery and
monitoring the charging and batteries closely. A better solution
is to charge each battery separately using model 12248-
A-ODY. BatteryMINDer and then connect them together, if
desired for long term maintenance-float charging. We suggest
your reading the detailed specifications on pages (26 - 31),
including the additional LED indicator functions (pgs. (14-15)
not already covered above.
After carefully reading these instructions and Troubleshooting
(pgs. 24 - 25) sections should you still have questions, please
e-mail our technical support department at:
[email protected].
Allow up to 3 business days for a detailed response to your
questions. Always identify the model number of the product
and revision letter of this manual contained on this page below.
Without this information we may not be able to assist you
correctly.
If your questions have already been answered in this manual
you can expect a response referring you back to this manual
and the specific page(s).
Note : If your questions relate to safety concerns, please
contact: [email protected] or if a