B&K Precision 570A - Manual - Manual (Page 13)

Model 570A Linear IC Tester
Copyright
 1993-2007 B&K Precision Corp.
on for ever. We recommend using a battery eliminator when using
CompactLink mode to develop test programs.
14. specifications
SPECIFICATIONS
Batteries: 4 X AA size
DC input: 6V, 850mA max, center positive, regulated.
Power consumption: Power off 10
A max
Standby 30mA max
Testing IC dependent
Test parameters: Supply voltage 2V to 10V IC dependant
Op amp gains open loop, 1,2,11,46
Stimulus 0 - 10V, 8 bits, 330R source
Sense 0 to 10.5V, 12 bit, >1M load
RS-232 settings 38400 baud, 8 data bits, 1 stop bit, no parity
Dimensions: 200mm X 100mm X 55mm approx.
Library ICs: Op amps, comparators, optos, regulators, references,
switches, miscellaneous