Atec Tektronix-MTG300 - Manual (Page 2)

MPEG Test and Monitoring Generator
MTG300
For the most up-to-date product information
visit our web site at www.tektronix.com
Copyright © 2002, Tektronix, Inc. All rights reserved. Tektronix products are
covered by U.S. and foreign patents, issued and pending. Information in this publi-
cation supersedes that in all previously published material. Specification and price
change privileges reserved. TEKTRONIX and TEK are registered trademarks of
Tektronix, Inc. All other trade names referenced are the service marks, trademarks
or registered trademarks of their respective companies.
04/02 HB/XBS 20W-13530-4
Seamless Looping
Any transport stream can be looped, with real-time
update of all time stamps, continuity counters and
time tables (TDT or STT).
PSI, SI or PSIP
Tables Manipulation
PSI/SI/PSIP tables can be dynamically deleted, inserted
or replaced by user-defined tables. Tables can be
created by the MTS300 Series. The starting and ending
time of the table changes can be set to any value
within PCR reference time.
Real-time Stress Addition
The following can be applied to any transport stream:
TS Header Stress –
The packet headers for any TS element can be
modified to any value.
Packets from any PID can be deleted over a
user-specified interval.
Time tables (TDT or STT) can be inserted, including
real-time updating of the time.
Undefined PIDs (i.e., not default PID numbers, or those
referenced by the PAT or any PMT) can be inserted.
PCR Stress –
PCR Jitter: For a PCR value change, pattern, period,
duration and amplitude can be defined.
PCR Period: For a PCR packet period change, both
period and period jitter are supported; pattern, period,
duration and amplitude can be defined.
Transport Stream Storage
At least 18 GB standard. Any transport stream length,
up to the entire storage amount, can be generated.
Sample Transport
Streams
Sample streams can be seamlessly looped, including
updating of all time stamps, continuity counters and
time tables (TDT or STT), without buffer under- or
overflow.
Transport Stream Creation
Compatible with transport stream recorders, such as
the MTS300 Series, that can export a captured file in
*.trp format. Also compatible with custom transport
streams created by the MTS300, the MTS300 Stream
Application Creation or any other software package that
creates files in *.trp format.
Networking
100Base-T
MTG Comm, an included standard accessory PC
software program, can download and upload
transport streams through the Ethernet port to/from
the MTG300.
Remote Control
MTG Comm, an included standard accessory PC
software program, can control MTG300 through the
Ethernet port. Stream generation start/stop, output
stream selection and the recall of user presets can
be controlled.
General Specifications
Environmental Characteristics
Temperature –
Operating: +5°C to +40°C.
Nonoperating: –20°C to +60°C.
Humidity –
Operating: 20% to 80% (noncondensing).
Nonoperating: 5% to 90% (noncondensing).
Power Requirements
AC Line – 90 to 250 VAC, auto switching.
Line Frequency – 48 to 63 Hz.
Power Consumption – 200 Watts Max.
EMC
Meets intent of Directive 89/336/EEC.
Safety Certification
Complies with the following safety standards:
UL3111-1 – Standard for electrical measuring
and test equipment.
Can/CSA c22.2 No.1010.1 – Safety requirements
for electrical equipment for measurement, control
and laboratory use.
IEC61010-1 – Safety requirements for electrical
equipment for measurement, control and
laboratory use.
Warranty – 1 year.
P h y s i c a l C h a r a c t e r i s t i c s
Dimensions mm in.
Height 132 5.2
Width 430 16.9
Depth 560 22.0
Weight kg lbs.
Net 14.5 32.0
Ordering Information
MTG300
MPEG-2 Generator.
Includes: User manual, Application software disk,
3.5 in., Interface cable, D-sub 25-pin, twisted pair.
Opt. D1 – Calibration data report.
Opt. 1H – High capacity 36 GB HDD.
Opt. 1R – Rackmount kit.
Support Options
Opt. C3 – Three years of Calibration Services.
Opt. D3 – Test data (requires Opt. C3).
Opt. R3 – Repair warranty extended to cover
three years.
MPEG Generators • www.tektronix.com/video 2
Contact Tektronix:
ASEAN Countries & Pakistan (65) 6356 3900
Australia & New Zealand (65) 6356 3900
Austria +43 2236 8092 262
Belgium +32 (2) 715 89 70
Brazil & South America 55 (11) 3741-8360
Canada 1 (800) 661-5625
Central Europe & Greece +43 2236 8092 301
Denmark +45 44 850 700
Finland +358 (9) 4783 400
France & North Africa +33 (0) 1 69 86 80 34
Germany +49 (221) 94 77 400
Hong Kong (852) 2585-6688
India (91) 80-2275577
Italy +39 (02) 25086 1
Japan (Sony/Tektronix Corporation) 81 (3) 3448-3111
Mexico, Central America & Caribbean 52 (55) 56666-333
The Netherlands +31 (0) 23 569 5555
Norway +47 22 07 07 00
People’s Republic of China 86 (10) 6235 1230
Poland +48 (0) 22 521 53 40
Republic of Korea 82 (2) 528-5299
Russia, CIS & The Baltics +358 (9) 4783 400
South Africa +27 11 254 8360
Spain +34 (91) 372 6055
Sweden +46 8 477 6503/4
Taiwan 886 (2) 2722-9622
United Kingdom & Eire +44 (0) 1344 392400
USA 1 (800) 426-2200
For other areas contact Tektronix, Inc. at: 1 (503) 627-7111
Updated 8 February 2002