Atec Tektronix-RSA3000B - Manual (Page 11)

Spectrum Analyzers — RSA3000B Series
Amplitude (Specifications excluding mismatch error)
Characteristic Description
Measurement Range Displayed Average Noise Level to Maximum Safe Input
Input Attenuator Range
0 dB to 50 dB, 2 dB step at <3.5 GHz; 10 dB step at
≥3.5 GHz (RSA3300B Models)
RF/Baseband input
0 dB to 55 dB, 5 dB step (RSA3400B Models)
0 dB to 30 dB, 10 dB step (RSA3300B Models)
IQ Input (Option 03)
0 dB to 35 dB, 5 dB step (RSA3400B Models)
Maximum Safe Input Level
Average Continuous
(RF Band, RF ATT
≥10 dB)
+30 dBm
MAX DC Voltage RF Band, ±0.2 V, Baseband, ±5 V, IQ input,
Option 03. ±5 V
Maximum Measurable
Input Level
Average Continuous (RF ATT: Auto): +30 dBm
Log Display Scale 10 μdB/div to 10 dB/div
Display Divisions 10 divisions
Display Units dBm, dBμV, Volts, Watts, Hz for Frequency
Measurements, and Degrees for Phase Measurements
Marker Readout
Resolution, dB units
0.01 dB
Marker Readout
Resolution, Volts units
0.001 μV
Reference Level Setting Range
RF –50 dBm to +30 dBm, 1 dB step
Baseband –30 dBm to +20 dBm, 5 dB step
IQ Inputs (Option 03) –10 dBm to +20 dBm, 5 dB step
Level Linearity over
Display Range
±0.2 dB, spec; ±0.12 dB, typical
Frequency Response (20 °C to 30 °C, Att. ≥10 dB)
Frequency Spec Typical
100 kHz - 40 MHz ±0.5 dB ±0.3 dB
>40 MHz - 3.5 GHz ±1.2 dB ±0.5 dB
>3.5 GHz - 6.5 GHz ±1.7 dB ±1.0 dB
>6.5 GHz - 8 GHz ±1.7 dB ±1.0 dB
Amplitude Accuracy (–20 dBm signal, 0 dB ATT, 20 °C to 30 °C)
Characteristic Description
Absolute Amplitude Accuracy at Calibration Point
±0.5 dB at 50 MHz (RSA3300B Models) RF
±0.5 dB at 100 MHz (RSA3400B Models)
±0.3 dB at 10 MHz (RSA3300B Models)
Baseband
±0.3 dB at 25 MHz (RSA3400B Models)
±0.5 dB (RSA3300B Models)
Input Attenuator Setting
Uncertainty
±0.2 dB (RSA3400B Models)
±0.2 dB (–10 dBm to –50 dBm at 50 MHz)
(RSA3300B Models)
Reference Level Accuracy
±0.2 dB (–10 dBm to –50 dBm at 100 MHz)
(RSA3400B Models)
(Att ≥10 dB, Preamp OFF), typical
VSWR
< 1.4:1 (300 kHz to 40 MHz), < 1.3:1 (40 MHz to
3 GHz), < 1.4:1 (3 GHz to 8 GHz)
(RSA3308B and RSA3400B Models)
FeliCa™ RFID Test Conditions* 2, 3
Characteristic Description
Amplitude Accuracy
(Variable Attenuator)
Absolute Accuracy: ±0.57 dB (99 percentile, 2.58σ)
Relative Accuracy: ±0.15 dB (99 percentile, 2.58σ)
Test Conditions:
Center Frequency: 13.56 MHz
Span: 5 MHz
RF Attenuator Setting: 0 to 14 dB
Input Power Range: 0 to –20 dB for Full Scale
Amplitude Accuracy
(Fixed Attenuator)
Absolute Accuracy: ±0.45 dB (99 percentile, 2.58σ)
Relative Accuracy: ±0.15 dB (99 percentile, 2.58σ)
Test Conditions:
Center Frequency: 13.56 MHz
Span: 5 MHz
RF Attenuator Setting: 0 dB
Input Power Range: 0 to –20 dB for Full Scale
Repetitive Amplitude
Accuracy
Repetitive Accuracy: ±0.04 dB (99 percentile, 2.58σ)
Test Conditions:
Center Frequency: 13.56 MHz
Span: 5 MHz
Reference Level: 0 dBm
Input Power: –10 dBm
Within 1 hour after Self Gain Calibration
AM Modulation Index
Accuracy
Accuracy: ±0.17% (99 percentile, 2.58σ)
Test Conditions:
Center Frequency: 13.56 MHz
Span: 5 MHz
Carrier Level: +4 dBm
AM Modulation Index Range: 1% to 10%
AM Frequency: 212 kHz, Sinusoidal Wave
ASK Modulation Index
Accuracy
Accuracy: ±0.21% (99 percentile, 2.58σ)
Setting Conditions:
Center Frequency: 13.56 MHz
Span: 5 MHz
Carrier Level: +4 dBm
At RFID Analysis Mode on RSA:
ASK Modulation Index Range: 1% to 10%
ASK Frequency: 212 kHz, Square Wave
* 2 FeliCa is the contactless IC card technology developed by Sony Corporation.
* 3 FeliCa is a trademark of Sony Corporation.
Distortion
Characteristic Description
3 rd Order Intermodulation Distortion
(Total Signal Power = –7 dBm, Ref Level +5 dBm,
Attenuator adjusted for optimum performance)
Frequency
3 rd Order IM
100 MHz to 3 GHz < –74 dBc (RSA3300B Models)
3 GHz to 8 GHz < –72 dBc (RSA3308B only)
2.0 GHz < –78 dBc (RSA3400B Models)
2 nd Harmonic Distortion
(–30 dBm tone at input mixer)
Frequency
2 nd Harmonic Distortion, Typical
10 MHz to 1.5 GHz < –56 dBc (RSA3300B Models)
10 MHz to 1.75 GHz < –56 dBc (RSA3308B only)
10 MHz to 1.4 GHz < –65 dBc (RSA3400B Models)
1.4 GHz to 1.75 GHz < –70 dBc (RSA3400B Models)
www.tektronix.com/rsa 11