Voltech, Ct1000 current t ransformer, Operation – Atec Voltech-CT1000 User Manual

Page 2

For 100A : 1A and 1000A : 1A AC Current Measurements

CT1000 Current T

ransformer

VPN: 86-005/5

While every care has been taken in compiling the information for this publication, Voltech Instruments cannot accept legal liability for any inaccuracies. Voltech Instruments has
an intensive program of design and development that may alter product specifications. Voltech Instruments reserves the right to alter specifications without notice and whenever
necessary to ensure optimum performance from its product range. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, or by any
means, electronic, mechanical, photocopying, recording or otherwise, without prior permission of Voltech Instruments.

Voltech

Power Analyzer

Load

Supply

CT1000

100:1

1000:1

Operation

Connect the CT1000 to your power

analyzer as shown in the diagram

above.

For primary circuit currents between

10A rms and 120A rms, use the out-

put sockets on the CT1000 marked

100:1.

For primary circuit currents between

100A rms and 1200A rms, use the

sockets marked 1000:1.

When the CT1000 is used with a Voltech

power analyzer, the analyzer’s scaling

function can be used to automatically

scale the measurements by a factor of

100 or 1000, as appropriate.

71mm

85mm

95mm

45mm diameter

51mm x 30mm

64mm x 13mm

100mm

75mm

5.5mm

128mm

57mm

Voltech Instruments Ltd.
148 Sixth Street, Harwell International Business Centre
Harwell, Didcot, Oxon, OX11 0RA, UK
Tel: +44 (0)1235 834555
Fax: +44 (0)1235 835016
E-mail: [email protected]

Voltech Instruments Inc.
11637 Kelly Road, Suite 306
Fort Myers, FL 33908, USA
Tel: +1 239 437 0494
Fax: +1 239 437 3841
E-mail: [email protected]

Voltech