Atec Tektronix-THS730A - Manual (Page 2)

Acquisition Modes - Sample, Envelope, Average,
Peak Detect.
Cursor Measurements - delta Volts, delta Time,
1/deltaTime (Hz), Degree (phase).
Cursor Types - Horizontal Bars, Vertical Bars, Paired
(volts @ time).
Display System - Interpolation: Sin(x)/x.
Format: YT and XY.
Mode: Vector, Dot, Vector Accumulate, Dot
Accumulate.
Automatic Measurements
Power Measurements (THS720P Only) -
DMM Specifications
DC Voltage Ranges - 400.0 mV to 880 V.
DC Volts Accuracy - ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges - 400.0 mV to 640 V.
Maximum Float Voltage - 600 VRMS CAT II, each
channel (probe dependent).
Resolution - 4000 count, 3-3/4 digits.
AC Volts Accuracy - ±(2% of reading + 5 counts).
Resistance Ranges - 400.0 Ohm to 40.00 megaohm.
Resistance Accuracy - ±(0.5% of reading +
2 counts); 40 megaohm: ±(2% of reading + 5 counts).
Period Frequency
+Width -Width
Rise time Fall time
+Duty cycle -Duty cycle
+Overshoot -Overshoot
High Max
Low Min
Peak-to-Peak Amplitude
Mean RMS
Cycle mean Cycle RMS
Burst width
W True power
VA Apparent power
VAR Reactive power
V Volts (RMS, Peak)
A Amps (RMS, Peak)
THD-F Total harmonic distortion as a percentage of the
fundamental
THD-
R Total harmonic distortion of the RMS of the input
signal
PF Power factor
DPF Displacement power factor
PHI Phase difference between the voltage and current