Atec Tektronix-P7260 - Manual (Page 2)

Data Sheet
P7260 Single-ended Active Probe
The P7260 is the fastest active probe in the world. It provides high
bandwidth, low circuit loading, low noise, and accurate probing solutions
for high-speed circuit designers. This probe has a small probe head for
accessing connection points in tight physical constraints and with today’s
fine pitch circuitry.
The P7260 is the world’s first probe to be developed with silicon germanium
(SiGe).It features a toggle/switch that offers the choice of using the probe at
either 1.5 V
p-p
or 6 V
p-p
dynamic range.
TekConnect interface takes probe intelligence to the next level, providing
probe power, automated signaling of scale factor and offset voltage. It also
adds automatic bandwidth adjustment and voltage measurement. The
TekConnect interface extends useful bandwidth and signal fidelity out to
18 GHz. A full complement of versatile probe tip accessories helps connect
to the wide range of devices faced by digital designers.
Characteristics
Designed for use with the TDS6604 oscilloscope - the system bandwidth is typically
6 GHz.
Characteristic Specification 5x Specification 25x
Type TekConnect Active, Single-ended
Bandwidth
(probe only, typical)
6 GHz 6 GHz
Rise Time (guaranteed) <75 ps <85 ps
Input Capacitance (pF) <0.5 pF <0.5 pF
Attenuation 5x 25x
Dynamic Range ±0.75 V (1.5 V
p-p
) ±3.0 V (6.0 V
p-p
)
DC Offset Range ±5 V ±5 V
Input Resistance 20 kΩ at DC 20 kΩ at DC
Maximum Nondestruct
Voltage
30 V (DC plus peak AC)
Compatible
Oscilloscopes* 1
TDS6604, TDS7404, all TekConnect oscilloscopes
* 1 Requires firmware version 2.1 or higher for TDS/CSA7000 Series.
Ordering Information
P7260
6.0 GHz Active Probe, TekConnect interface.
Includes: Probe tip accessories (see list), user manual, storage case.
Warranty: One year.
Service
Opt. C3 – Calibration Service 3 Years
Opt. C5 – Calibration Service 5 Years
Opt. D1 – Calibration Data Report
Opt. D3 – Calibration Data Report 3 Years (with Opt. C3)
Opt. D5 – Calibration Data Report 5 Years (with Opt. C5)
Opt. R3 – Repair Service 3 Years
Opt. R5 – Repair Service 5 Years
P7260 Included Accessories
Description Quantity Part Number/Status
Instruction Manual 1 each 071-0922-xx
Probe Carry Case 1 each 016-1879-xx
Y Lead Adapter 2 each 196-3434-xx
3 in. Ground Lead 2 each 196-3437-10
SMT KlipChip™ Adapter 2 each 206-0364-xx
SureToe™ 1 set ST501
(Replacement Pkg of 12)
Accessory Reorder Sheet 1 each 001-1349
Short Ground Pogo Pin
(set of 8)
1 set 016-1917-xx
Square Pin Adapter
(set of 4)
(adapt to .100 in. centered
square pins)
1 set 016-1910-xx
Color-coding Bands,
5 colors
1 set 016-1886-xx
"L" Adapter (set of 2) 1 set 016-1913-xx
Antistatic Wrist Strap 1 each 006-3415-xx
Customizable Grounded
Lead (set of 5)
1 set 196-3482-xx
Recommended Accessories
Description Quantity Part Number/Status
TekConnect Calibration
Adapter/Fixture/SW
1 each 067-0422-xx
Probe Arm 1 each PPM100
High-speed Deskew
Fixture
1 each 067-0484-xx
Probe Calibration Fixture 1 each 067-1456-xx
IC Grabber (set of 2) 1 set 013-0309-xx
Related Products
80A03 – TekConnect Probe Interface Module for TDS/CSA8000 Series
oscilloscopes.
Product(s) are manufactured in ISO registered facilities.
2 www.tektronix.com