Tc series, Controller features – Atec Tenney-TC10RC User Manual
Page 2
TC SERIES
• Single or Dual Channel
• Profiling: 40 Profiles, 256
Steps
• Automatic & Manual
Control
1 Input: Universal Type
(RTD is Std.)
• 4 Digital Inputs
• 2 Control Outputs: Time
Proportioned, On/Off, or
4-20 ma
• 2 Alarm Outputs
• 8 Digital Event Outputs
• 2 Retransmit Outputs -
Optional
• Communications: EIA-
232 and EIA-485 with
Modbus RTU protocol
All technical data specified for units with standard equipment. All figures are typical average values for TC Series devices. SPX Thermal Product Solutions reserves the right to alter
technical specifications at any time. Data may vary depending on ambient conditions, product load, or other changes causing interference to chamber airflow.
Specifications and Product Information is subject to change without notice. Images for reference only. Some options and accessories may not be included with all configured models.
Performance estimates based on 230v 1P 60Hz
*Humidity Range: based on temperature range 20°C to 85°C limited by 3°C dewpoint
Controller Features
www.tenney.com/tc