Atec Tenney-T-Shock-JR - Manual (Page 2)

Specifications
.25 102 x 6 x 6c 3 2 + 2 + LN
2
2.5/.5 63 x 41 x 22 Not Avail TSJR 700
Heat Dimensions W x H x D
Model
Carriage Capacity Product Load Refrigeration
WT
LBS Ft 3
Horizontal
Model
Vertical
Model
W x H x D LBS HP KW
2 15 4 + LN
2
TS2.02.04B 3700
2 11 10 TS2.02.10 4000
8 35 6 + LN
2
127 x 88 x 72 TS2.08.06B 4200
8 35 30 Call TS2.08.30 4700
89 x 72 x 58 15 x 15 x 15 110 x 88 x 33 9/2
25 x 23 x 25 (V)
or
23 x 25 x 25 (H)
21/4 97 x 89 x 75
TS2 MODELS - TWO ZONE: HOT/COLD (WATER COOLED)
2 16 4 + LN
2
129 x 88 x 53 TS3.02.04B 3900
2 10 11 140 x 88 x 53 TS3.02.10 4200
8 40 6 + LN
2
156 x 88 x 72 TS3.08.06B 4400
8 35 30 Call TS3.08.30 4900
Not
Available
15 x 15 x 15 9/2
25 x 23 x 25 (V)
or
23 x 25 x 25 (H)
21/4
TS3 MODELS - THREE ZONE: COLD/AMBIENT/HOT (WATER COOLED)
2 28 4 + LN
2
129 x 88 x 53 TSD.02.04B 4200
2 18 10 140 x 88 x 53 TSD.02.10 4500
8 60 6 + LN2 156 x 88 x 72 84 x 115 x 72 TSD.08.06B 4700
8 56 30 Call 94 x 115 x 72 TSD.08.30 5200
15 x 15 x 15 18/2
25 x 23 x 25 (V)
or
23 x 25 x 25 (H)
42/4
TSD MODELS - DUAL LOAD: HOT/COLD/HOT (WATER COOLED)
78 x 91 x 53
Two Zone
-65
to
200
-65
to
200
Two Zone
Horizontal or Vertical
-73
to
200
40
to
200
Three Zone
-73
to
200
40
to
200
Amb.
Dual Load
Horizontal or Vertical
40
to
200
40
to
200
-73
to
40
Notes: Notes: Notes: Notes: Notes:
Add “V” or “H” suffix to model number to designate
vertical or horizontal configuration.(Ex: TS2.02.10H)
Custom configurations, capacities, and basket and tray
designs available. Please call us.
Performance evaluation was made with a distributed
product load of 16 pin dip devices. Low temperature
-65ºC; high temperature +150ºC. Sensors embedded in
load samples achieved a 15 minute recovery per
MIL-STD-883C Notice 5, Method 1010.7 and air
temperature recovery was 5 minutes per MIL-STD-202F,
Method 107G. Performance data are based on 24ºC
ambient at sea level. Standard operating voltages 208,
230, or 460V; 3Ø; 60 Hz. On 50 Hz, performance may
be reduced.
TSD model capacities are for total load divided into two
compartments.
One of the most compact thermal shock chambers in the world, Tenney’s
T-Shock Jr. takes up fewer than 10-square feet of bench area but provides
complete thermal shock testing while doubling as a standard test chamber.
TSJR MODEL (Air Cooled)