System specifications, Environmental and safety features, Facility requirements – Atec Temptronic-TP04310A User Manual
Page 2
Over-Temperature Protection
+235°C (factory-set) (Also uses user-settable high and low air temperature limit)
Mobility
4 swivel caster wheels with locks (10.16 cm (4 inch) diameter, static dissipative);
rear handle for ease of transport
Refrigerants
HCFC-free and CFC-free, non-toxic, non-flammable
Noise level
<65 dBA approximately
Serviceability
Field-replacement modules and printed circuit boards
Weights and Dimensions
Base: Width: 61.0 cm (24 in.) Depth: 71.1 cm (28 in.); Height: 108 cm (42.5 in.);
System weight: 236 kg (520 lbs); Packed: 365 kg (805 lbs)
Maximum operating height
130.3 cm (51.25 in.) approximately
Minimum operating height
69.9 cm (27.5 in.) approximately
(An additional 20.3 cm (8 in.) rear clearance is required for supply connections and cabinet ventilation.)
Windows® is a registered trademark of
Microsoft Corporation.
ThermoStream® and ThermoFixture®
are registered trademarks of Temptronic
Corporation.
Copyright 2000, 2002, 2005 Temptronic
Corporation. These specifications are valid for
the standard product and are subject to change
without notice. Applications requiring modification
of electrical, thermal or mechanical characteristics
should be discussed with the factory for possible
accommodation at an additional cost.
Printed in USA.
Part No. SL10290 R/C
3/2005
ENVIRONMENTAL AND SAFETY FEATURES
Power Requirements
5
200-250 VAC (230V nominal),
50 Hz, 30 amp, 1 phase
200-250 VAC (230V nominal),
60 Hz, 30 amp, 1 phase
Compressed Air Requirements
Clean, Dry Air
Filtered to 5 micron particulate contamination
Oil content:
<0.01 ppm by weight filtered
to .01 micron oil contaminant
Dewpoint:
<10ºC @ 6.2 BAR (90PSI)
Supply Pressure
6.2 to 7.6 BAR (90 to 110 PSIG)
Supply flow at minimum
7.2 l/s to 14.3 l/s (15 to 30 scfm)
supply pressure
(Nominal 25 scfm)
Air supply temperature
+20º to +25ºC (+22ºC nominal)
Operating Temperature
+20º to +28ºC (+23ºC nominal)
Humidity
0 to 60% (45% nominal)
5
Note: System is configured for operation within voltages listed above using an internal transformer.
Please specify power configuration with order.
*
Under operating conditions which are less or greater than nominal, performance may be less
than specification provided.
Model TP04310A
ThermoStream
®
System
Specifications
FACILITY REQUIREMENTS
4 Commercial Street
Sharon, MA 02067 USA
Tel: (781) 688-2300
Fax: (781) 688-2301
www.temptronic.com
ISO 9001-2000 Certified