Atec Teseq-CDN_118 - Manual (Page 2)

A d v a n c e d Te s t S o l u t i o n s f o r E M C
Technical specifications
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected]
www.teseq.com
TELECOM LINE COUPLING/DECOUPLING NETWORK
CDN 118
691-258A February 2011
© February 2011 Teseq ®
Specifications subject to change without notice.
Teseq
® is an ISO-registered company. Its products
are designed and manufactured under the strict
quality and environmental requirements of the ISO
9001. This document has been carefully checked.
However, Teseq
® does not assume any liability for
errors or inaccuracies.
Max. operating voltage: AC 250 V
DC 250 V
Max. operating current: 0.5 A
Ohmic resistance per path: 3 Ω
Decoupling chokes 1kHz: 20 mH nominal
Pulse: 1.2/50 μs and 10/700 μs pulse
Max. pulse voltage: 6.6 kV line to ground, 3 kV line to line
Accesories:
Resistor networks:
INA 172 4 X 100 Ω, 6 W
INA 175 4 X 160 Ω, 6 W
Coupling adapters: INA 170 Spark gap device, 90 V trip voltage
INA 171 Capacity 0.1 μF//spark gap device, 90 V trip voltage
INA 173 Short circuit connector