Atec Thermo Scientific-E509A - Manual

• Software selectable Surge waveforms:
10/1000
ms, 600V, 100A/side peak short-circuit current
10/1000
ms, 1000V, 100A/side peak short-circuit current
10/1000
ms, 1500V, 100A/side peak short-circuit current
• Ability to add a complete range of modules:
– Surge and EFT simulator modules for all
major national and international standards.
– AC mains coupler/decouplers for single or
three-phase lines, to 600V rms and 100A
continuous AC line current (the E509A waveforms
are not coupled to the AC mains).
– I/O line coupler/decouplers for all types of lines,
including telecom and RS-232.
ECAT ®
Model E509A
Surge Simulator for Three-terminal
10/1000
m
s Telecom Testing
A plug-in module for ECAT
systems for true three-terminal
testing using 10/1000
m
s voltage
and current waves, as required by
Bellcore GR-1089-CORE.
FEATURES
• The ECAT is configurable as a compact,
standalone system with one test capability or as
an integrated, multiple capability tester.
• Unparalleled safety features for high voltage
testing, including a complete interlock system that not
only disables simulator operation if activated, but
completely removes AC mains power from the EUT,
when using any KeyTek AC mains coupler/decoupler.
• Automatic report generation using KeyTek’s
exclusive Windows ® -based software.
• Modular system construction provides the ability
to upgrade test capabilities as requirements change
or evolve.
• Single port testing for Surge, EFT and PQF ™ mains
coupled disturbances allows changing test modes
without switching off power to the EUT. This avoids
lost time due to re-initializing the EUT between tests.
SYSTEM BENEFITS