Atec Teseq-Schaffner-NSG438 - Manual (Page 2)

Optimized fOr AutOmOtive testing
nsg 438 high end esd simulAtOr
Technical specifications
Basic set: Carrying case with: discharge pistol, cradle for discharge pistol,
high voltage base unit with built-in battery pack, mains adapter and
battery charging unit (100 to 250 VAC), discharge network
150 pF/330 Ω, air- and contact-discharge tips, grounding cable,
user manual, 25 mm discharge sphere
Pulse networks: Network 150 pF/330 Ω as per IEC/EN 61000-4-2 (included)
Optional ISO 10605 networks 330 pF/330Ω, 150 pF/2 kΩ and
330 pF/2 kΩ
Range of RC networks for other standards:
R = 0 Ω to 20 kΩ; C = 50 to 2000 pF
Discharge voltage: Air-discharge: 200 V to 30 kV (in 100 V steps)
Contact-discharge: 200 V to 30 kV (in 100 V steps)
Discharge tips: Ball and point as per IEC and specials, exchangeable by threaded
cap
Charging voltage measurement: kV, accuracy better than ±5% (stabilized)
Discharge detection:
Indicated by the kV symbol being displayed in inverse also
(air-discharge only) acoustically in the ‘Single’ operating mode. Adjustable threshold
level.
Holding time: > 5 s (charging voltage +5%)
Polarity: Positive / negative / automatic change
Operating modes: Single / repetitive / random (time/pulse)
Pulse counter: 0 to 9999
Pre-select counter: 0 to 9999
Repetition:
- 0.5/1/5/10/20, 25 Hz (air)
- 0.5/1/5/10 H or 20 Hz (contact)
- freely selectable from 0.04 to 300 s
- continuous operation
Display: LCD panel showing: charging voltage, breakdown event, polarity
air- /contact-discharge, counter/preselect counter content, network
parameters, battery monitor
Weight: Discharge pistol (w/o cable): 1.2 kg (2.6 lbs) approx.
Base unit: 6.5 kg (14.3 lbs) approx.
Ambient conditions: Operation:
+5 to +40°C, 20 to 80% r.h. (non-condensing), 68 to 106 kPa
Accessories: The full accessory range such as discharge network special tip
E- and H-field adapter and ESD measurement target can be found
in the brochure.
nsg 438 high end esd simulAtOr
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[email protected]
www.teseq.com
691-028B January 2010