Atec Tettex-2883 - Manual (Page 3)

3 / 4
TECHNICAL SPECIFICATIONS
Dimensions
Size 54.6 x 34.7 x 24.7 cm (21.5” x 13.66” x 9.72”)
Weight
Instrument 24.9 kg (single case) (55 lb)
Cable / Accessory Bag 16.2 kg (35.7 lb)
Environment
Operating Temperature -10 .. 50°C (14..122° F)
Storage Temperature -20 .. 70°C (-4..158° F)
Relative Humidity 5 .. 95 % r.h. non-condensing
Standards
Safety IEC 61010-1 (2010) EN 61010-1:2001(ZEK 01.4-08)
EMC EN 61000-3-2 (2006) EN 61000-3-3 (2008) EN 61000-4-2 (2009)
EN 61000-4-3 (2010) EN 61000-4-4 (2004) EN 61000-4-5 (2006)
EN 61000-4-6 (2007) EN 61000-4-11(2004) EN 55011 +A1(2009)
Drop Test IEC 60068-2-31 Edition 4.0 (face, corner, free fall)
Shock & Vibration IEC 60068-2-64 Edition 2.0 IEC 60068-2-27 MIL-STD-810G
Aging Cycle MIL-T-28800
Inputs
Power 90 .. 264 VAC 50/60 Hz, 800 W, active PFC (acc. IEC61000-3-2)
Measurement ≤ 180 mA
RMS
Output
Voltage 100 .. 12’000 V
RMS
(@ 45 .. 70 Hz)
Frequency 15 .. 400 Hz (Voltage ≤ 5 kV)
Current ± 180 mA
RMS
DUT Capacitance max. 47 nF @ 12 kV
RMS
@ 50 Hz, max. 39 nF @ 12 kV
RMS
@ 60 Hz
Measurement Resolution Accuracy
Dissipation / Power Factor
tan / cos 
0.0001 ± 0.5 % rdg ± 0.0001
@ 50..60Hz
0.01 % ± 0.01 % rdg ± 0.5 %
@ 50..60Hz
Capacitance 0.01 pF ± 0.3 % rdg ± 0.3 pF
Test Voltage 1 V ± 0.3 % rdg ± 1V
Test Current 0.1 μA ± 0.3 % rdg ± 1 μA
Watts / Power 0.1 mW, mVA, mVAR ± 0.8 % rdg ± 1 mW, mVA, mVAR
Quality Factor 0.0001 ± 0.5 % rdg ±0.0001
Internal Reference 100 pF Reference Capacitance, tan  < 0.00001
Temperature coefficient < 0.01 % / K, Capacitance ageing < 0.01 % / year
Safety Features Open Ground Detection
Security handheld switch, foot switch (optional)
internal warning indicator, external warning lamp (optional)
audible warning signal
Interfaces USB 2.0 for Memory Stick, Ethernet, Thermal Printer
Display 7” TFT , 800 x 480, Colour Touch Screen
Data Formats XML, CSV
Record Values DF (tan ) DF (tan )
@20°C
DF%(tan ) DF%(tan )
@20°C
PF (cos ) PF (cos )
@20°C
PF%(cos ) PF%(cos )
@20°C
Capacitance Cx Resistance Rx Inductance Lx Frequency f
Test Current Ix Mains frequency fm Noise frequency fn Apparent Power S
Real Power P Reactive Power Q S/N Ratio Quality Factor QF
Ref Current In Capacitance Cn Current Imag (Lp) Current Ife (Rp)
Phase-angle  (Zx) Voltage U
RMS
Insulation Temp. Temp.Corr.Factor K
Conditions Comments Connection mode Time/Date
Settings
Calibration Interval 2 years recommended