Atec Tektronix-PB200 - Manual

packetBERT PB200
Features
Specs
Bit Error Rate Test Set
packetBERT
TM
PB200
This product is discontinued.
View
alternative products .
CHARACTERISTICS
GENERATOR
Clock -
External clock input:
Frequency: DC to 200 MHz.
Amplitude: 0.5 to 5.0 V p-p.
Connector: BNC.
Termination select: 50 Ohm to -2 V, +3 V, AC or GND.
Input range: ECL, TTL, PECL compatible.
Threshold resolution: 10 mV step.
External clock reference input:
Frequency: 10 MHz, ±100 ppm maximum.
Amplitude: 0.5 to 2.0 V p-p, AC coupled.
Termination: 50 Ohm.
Connector: BNC.
Internal synthesized clock source:
Frequency: 1 Hz to 200 MHz.
Resolution: 1 Hz.
Accuracy: 10 ppm.
BURST clock:
Programmable gap: 16 Kbits maximum, 8-Bit resolution.
Pattern Generator -
PRBS: 2
N
- 1, N = 31, 23, 15, 11, 10, 9, 7.
Programmable word: 256 Kbits maximum, 8-Bit resolution.
Mark density: PRBS 2
10 1 (1/8, 1/4, 1/2, 3/4, 7/8).
Mixed mode frame: 256 Kbits maximum, 8-Bit resolution.
Error injection:
Error: Single, Rate, External (TTL).
Field select: Overhead, payload or both.
Error rates: Error rate of 10
-n , n = 3, 4, 5, 6, 7.
Outputs -
Data and clock outputs:
Format: NRZ.
Configurations: Differential (True/Complement).
Source impedance: 50 Ohm.
Connector: BNC.
Amplitude: 0.5 V to 2.0 V, 10 mV step.