Atec SPAA05-NEX - Manual (Page 2)

SPAA05-NEX
Technical specifications
Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005
SPAA05.com
Antenna alignment solutions for professionals
GPS Receiver
24 channel DIFF/DGPS GPS receiver with WAAS
Accuracy
Heading:
0.5° rms
Position: 0.6 m rms
Altitude/Height: 2.0 m msl
Battery
Type:
NiMh 8.4V 2700mAh
Life: 8 hrs
Charge time: 4 hrs
Mechanics
Dimensions:
length 0.90 m / 1.80 m*
width 0.13 m
height 0.07 m
Weight: 2.30 kg**
Indicators: Power, heading, differential,
on-board receiver 1 and 2
Communications
9p comport on 38400 baud UART
Bluetooth™ internal long range class 1
RDS 1/2/3 comport
Remote tiltsensor port (proprietary)
Environmental
Operating temperature:
-10°C to 50°C (14°F to 122°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Humidy: 95% non-condensing
System output data***
Site information (Name, location, etc.), cell and sector ID, bearing,
(True/Grid North, measured and difference), date and time,
longitude and latitude, antenna hardware information,
SPAA05 hardware and software information
Parts
• AB-ST2 integrated telescopic boom with 2 GPS antennas
and GPS system
• AC-E1 universal antenna bracket
• OOD-K1 keycord with on/off dongle
• Safety lanyard (3m)
• 12/110/220V charger with exchangeable EU/UK/USA plugs
* contracted / extended
** 3.10 kg with AC-E1 clamp
*** among other
© Copyright 2009, SPAA05.com. All rights reserved. Specifications subject to change without notice.
SPAA05, SPAA05.com, SPAA05-NEX and their respective logos are registered trademarks of SPAA05.com.
Made in the Netherlands. Patent pending.
®