Atec King-Nutronics-3112 - Manual (Page 3)

Specifications
Characteristics Specifications
Carrying case:
Metal gauge
Weatherproofing
Material
Instrument protection
0.050 inch
Rubber seal gasket
Anodized aluminum
Lock and key
Panel:
Material
Metal gauge
Item identification
Anodized aluminum (6061-T6)
0.125 inch
Silk-screening on face
Master gauges:
Accuracy
Readability
0.5% of full scale
4.5 inch mirror dial with adjustable pointer
Supply gauge:
Readability
Range
2 inch
0 to 3,000 psig
Metering valves Panel-mounted brass, fine-metering type, with replaceable Teflon seat
Fill and test ports:
Material
Threads
Protection
300-series stainless steel
AND10056-4 (1/4” flare)
Captive dust caps
Internal supply cylinder:
Capacity
Rating
Proof test
7.1 standard cubic feet
ICC 3AA to 2,250 psig. Retest due date noted on panel face.
4,500 psig
Plumbing:
Material
Couplings
300-series seamless stainless steel tubing
AND flare
Filtration 10µm nominal
Check valve Soft seat
Burst disc pressure (brass) 3,000 psig nominal
Gauge protector Adjustable, non-bleed
Relief valve Adjustable, atmospheric bleed
Case relief valve Automatic two-way vent ±0.5 psig, manual override
Test hose:
Length
Construction
Fittings
5 feet
Synthetic rubber with scuff-resistant fiber braid
Cadmium-plated steel with female AN flare swivel fittings
Electrical tester:
Voltage range
Test lead length (qty. 2)
Terminations
Lamp type
65 to 250 VAC
5 feet
Male plugs and alligator clips
DIALCO Data Light (replaceable), neon
Dimensions, excluding handle
(W x H x D)
16 x 8 x 9
Weight 22 lbs.