Atec King-Nutronics-3603-3604-3605-A - Manual (Page 2)

Model 3603-A Thermo Unit (100°F to 600°F)
Smallest of the Thermo Units manufactured by King Nutronics
Corporation, the Model 3603-A is an easy to use self-contained
instrument designed to generate, control, measure, and display
temperatures from 100°F to 600°F, with an accuracy of ±0.5°F
throughout its operating range. The Model 3603-A thermo unit
weighs only 12.5 lbs., and is housed in a rugged, compact 11” x 7” x
10” aluminum case, making for easy transport to remote job sites.
A simple ON/OFF switch and a push-button temperature selector
control all functions. The measured temperature and other status
information is shown on the 16-character digital display.
Four adapter chucks are furnished with the Model 3603-A in the
following bore diameters: 1/4", 3/8”, 7/16”, and 9/16”. Other bore
diameters are available upon request.
Model 3604-A Thermo Unit (100°F to 1200°F)
The Model 3604-A Thermo Unit by King Nutronics
Corporation is a self-contained portable dry well
temperature calibration system designed to generate,
control, measure, and display temperatures from 100°F to
1,200°F, with an accuracy exceeding ±0.15% or ±0.8°F of
the setpoint value, whichever is greater, throughout its
operating range.
Incorporating an IEEE-488/GPIB bus, the Model 3604-A
Thermo Unit can be operated from a remote terminal using
simple commands, or via the user-friendly front panel
keypad and display. A convenient built-in dot-matrix printer
generates hard copies of test and calibration data.
Two configurations of the Model 3604-A Thermo Unit are available. Part No. 3604A-1-1 includes four adapter
chucks in the following bore diameters: 1/4", 3/8”, 7/16”, and 9/16”.
Part No. 3604A-1-101 includes 12 adapter chucks conforming to specific U.S. Navy requirements.
Compartments in the carrying case permit up to a dozen adapter chucks to be stored and transported with the
instrument.
Each Model 3604-A Thermo Unit also includes an accessory kit containing a dial caliper, a continuity tester,
adapter chuck handling tools, an adapter chuck for standard glass thermometers, and an assortment of spare
parts. All accessories and parts are stored in the case lid for convenience.