Atec Quantum-Data-882E - Manual (Page 2)

General Specifications
Size (mm)
Humidity
Operating temp.
AC Mains
Frequency
Voltage
HDMI (included with HDMI 1.3 option)
Connector
TMDS (single link)
Video
TMDS protocols
Encoding
Sampling modes
Color depth (HDMI)
Color depth (DVI)
Clocks per pixel
Pixel repetition
TMDS differential swing
Quantization modes
Colorimetry
Content fitting methods
Aspect ratio
Content
Embedded
Format (coded)
Format timings
Data (island) packet
generator types
InfoFrame types
Audio
Streams
Channels
Bits per sample
Sampling rates
Stream type
Audio content
Mixer mux
Embedded sonic data generator
Channels
Waveform
Amplitude
Frequency Change
Controls
External audio interface
Type
Amplitude
Connector
Cable
DVI
Connector
Encoding
TMDS differential swing
Analog Composite (included with analog video option; not avail-
able with 882E analyzer)
Connectors
Encoding
Sample rate
Pixel rate
Pixel aspect ratio
Swing
Calibration
APPLICATION TESTS
Quantum Data, inc. 2111 big timber road elgin, iL 60123 usa Phone (847) 888-0450 fax (847) 888-2802 www.quantumdata.com
330 W, 87 H, 284 D
30 to 80% RH (non-condensing)
0 to 40° C
47 to 63 Hz
90-264 VAC
One HDMI Type A
225MHz clock; 2.25 Gb/s link rate
DVI 1.0 and HDMI 1.3
RGB or YCbCr (only RGB in DVI mode)
4:4:4 or 4:2:2 (only 4:4:4 in DVI mode)
24/30/36-bit 4:4:4 RGB / YCbCr
16/20/24-bit 4:2:2 YCbCr
24-bits per pixel RGB 4:4:4
1 or 2
1 to 10 using interactive test image
150-1560 mVp-p (programmable)
Full with optional gamma correction
ITU-R BT.709-5 Part 1, Sec 6.10
SMPTE 296M Sec 7.12
under/overshoot
Legacy HDTV SMPTE 260M-1999
Table 1, ITU-R BT.601-5 Sec 3.5.1
and ITU-R BT.709-5 Sec 4.2-1125
xvYCC 601 & xvYCC 709 for x.v.Color
All AFD cases (Shoot & Protect,
Overscan,Under-scan, Letterbox/Pillarbox,
Anamorphic Squeeze)
4:3, 14:9, 16:9
4:3, 16:9
4:3, 16:9
All EIA/CEA-861-D formats
All E-EDID sink-requested < 165 MHz
General control packet, audio samples,
ACR data, InfoFrames, null frame
AVI, SPD, AUD, MPG, GIF (generic)
4
8
16, 20, 24
32.0, 44.1, 48, 88.2, 96.0, 176.4, 192 kHz
IEC 60958-3 Consumer LPCM
Dolby Digital, Dolby Digital Plus, Dolby
TrueHD Other audio formats with
external source
FL, FR, LFE, FC, RL, RR, RC, FLC, FRC, RLC
and RRC
Sinewave or external audio
8
Sinewave
-96.3 to 0.0 dBFS
20 Hz to 20 kHz
Mute, amplitude, frequency
SPDIF input (coaxial)
As received
BNC with special SPDIF I/O
75 ohm coax cable
HDMI output with HDMI-to-DVI cable
RGB (4:4:4 with 8-bits/component)
150-1560 mVp-p (programmable)
CVBS (BNC) and S-Video
NTSC and PAL
24.55-29.50 MHz
12.27-14.75 MHz
Standard or square
1000 mVp-p fixed with programmable
calibration
self-calibration with internal reference
Analog Component (included with analog video option;
not available with 882E analyzer)
Connector
Color encoding
Video levels
Video swing
Sync swing
Video setup
Calibration
Protection
Internal data storage
Digital Sync
Outputs
Swing
Pixel Clock
Frequency range
Analog component
HDMI
DVI
Step
Accuracy
Horizontal Timing
Frequency range (kHz)
Analog composite
HDMI / DVI
Total pixels (max)
Active pixels (max)
Active pixels 882EA (max)
Blank pixels (min)
HDMI
DVI
Step pixels
HDMI
DVI
Vertical Timing
Frequency range
Total lines (max)
Active lines (max)
Blank lines (min)
Step lines
Scan types
Composite sync types
Video Memory
Size
Maximum width
Color depth
Administration
Physical user interface (selection keys and display)
Control interfaces
Browser-based virtual control panel to manage
from any network location
Create custom Microsoft Windows-based applications
using Quantum Data SDK (includes API documentation,
sample application & source)
PCMCIA slot
SPECIFICATION
882E/882EA HDMI
VGA
RGB, YPbPr (unfiltered)
0-1000 mV
0-400 mV (bi-level), 0-800 (tri-level)
0-100 IRE
Self-calibration with internal reference
Buffered with 75 ohm isolation
15 MB
HS, VS and Special Sync
> 2V fixed into 75 ohm
5.16-250 MHz
25-165 MHz (single-link)
25-165 MHz (single-link)
Less than 0.1 Hz
50 ppm (electronically adjustable to
<5 ppm with external frequency
counter)
15.734 or 15.625
8-1000
65,535
4096
2048
14 (minimum)
12 (minimum)
1
1
1-650 Hz
4095 progressive, 8193 interlaced
and segmented
4096
1 to Total-1
1
Progressive, interfaced, segmented
ORed, Serrated, Serrated and
Equalized, Tri-level
16,384,000 pixels at 32-bits/pixel
32,768,000 pixels at 8-bits/pixel
16,384 pixels at 32 bits/pixel
16,384 pixels at 8 bits/pixel
36 bit up to 165 MHz
32 (24-bit TrueColor) up to 250 MHz
8 bits up to 250 MHz
RS-232 serial AT
10/100 BaseT Ethernet (TCP/IP, FTP,
Telnet) GPIB
Compact Flash card to boot genera-
tor, backup generator configuration,
copy generator configuration to other
generators, and store patterns
STANDArD FEATurES
Video Pattern testing
Formats
Number of formats
Standards
Deep Color
Patterns
Number of patterns
Pattern file type
Internal data storage
Audio pattern tests
Test
Sound Pressure &
Main Speaker
Frequency Response
Speaker Distortion
Early Reflections
Polarity of speaker
wires
Sound Convergence
oPTIoNAl ouTPuTS
HDMI 1.3 Transmitter (Tx)
Pixel rate
Deep color
HDMI 1.4a 3D Testing
x.v. Color
High bit rate audio
Programmability
EDID 1.4 Compliance
Test
Analog Transmitter
Component
Composite
oPTIoNAl HDMI TrANSMITTEr FEATurES
CEC debug utility
HDMI Analyzer (2 HDMI Tx ports and 2 HDMI rx ports)
HDMI Sink Test
oPTIoNAl HDMI ANAlyzEr FEATurES
CEC debug utility
CEC 1.4
Compliance Test
HDCP CTS 1.2
Compliance Test
Over 580 formats for testing IT, CE,
military and other display test applications
CEA-861E; VESA
24/30/36-bit/pixel 4:4:4 RGB / YCbCr
More than 320 patterns
Custom object (.o) files, BMP, JPEG, PNG
15 MB
Pattern
Pink noise
500-2kHz
20-20kHz
Sine wave 63 Hz, 125Hz, 1kHz, 4kHz
Impulse
Polarity
Autotime Delay
165MHz, 225MHz TMDS rate with deep
color
8, 10, 12 bit/component
Standard test patterns and 3D custom
bitmaps. Frame Packing, Side-by-side,
Top-and Bottom, Line Alternative,
L+Depth
wide gamut color
Dolby & DTS lossless compressed formats
timing, patterns, automation
for HDMI sinks approved test tool for
HDMI ATCs
up to 250MHz
NTSC and PAL
Integrated Troubleshooting Environment
(ITE)
Analyze deep color sources
Measure source timing
Test for pixel errors
Test HDMI cables
Integrated Troubleshooting Environment
(ITE)
Test Management Environment (TME)
(includes ITE) approved test tool for HDMI
ATCs
For sources, sinks and repeaters
approved test tool by DCP