Atec Rohde-Schwarz-SMF100A - Manual (Page 7)

¸SMF100A Microwave Signal Generator 7
Optional flash disk plug-in module, open (top) and closed
Selection of interfaces
The ¸SMF100A microwave signal
generator can be remote-controlled via
GPIB, LAN, or USB (LAN is part of the
base unit). Slots are provided for the
GPIB and USB options.
The two spare slots can be used for a
maximum of two of the following three
options: ¸SMF-B83 removable
GPIB, ¸SMF-B84 removable USB, or
¸SMF-B85 removable flash disk.
For operating the instrument outside
the security area, an optional spare
CompactFlash™ memory card
(¸SMF-Z10) is available on which
no security-relevant data is stored. You
can insert this spare card in the slot,
switch on the signal generator, and then
perform an internal instrument adjust-
ment. The instrument is now ready for
operation, calibration, or repair.
Rear view of the ¸SMF100A with optional GPIB and USB (master and slave) interfaces
SMF_bro_en_5213-7660-12_v0201.indd 7 13.02.2009 15:44:04