Atec Noise-Com-NC7108 - Manual (Page 2)

2-2 FUNCTIONAL SPECIFICATIONS
Non Volatile memory to retain program parameters, GPIB address,
serial baud rate and user programmed control sequences
NOISE COM, INC.,
Baud Rates: 300, 1200 and 9600 to be used with
optional serial interface ports.
Time Delay: . 1 to 999.9 seconds with .1 second
resolution.
Programmable Attenuator: Standard 0-127DB in 1DB steps.
Programmable Attenuator: Optional 127.9DB in 0.1DB steps.
Bandwidth selection: Optional band switching filter to
customer specification. Consult
Noise Com.
Standby Position: Power is switched into a dummy load.
Reset: A logic reset button is provided.
Second Output: Optional SPDB Switch to connect
either of two outputs.