Atec Ophir-5225 - Manual

Parameter Specification @ 25º C
Electrical
1 Frequency Range 80 – 1000 MHz
2 Saturated Output Power 200 Watts Typical
3 Power at P1 dB 120 Watts Minimum
4 Small Signal Gain +54 dB Minimum
5 Gain Flatness + 2.0 dB Maximum
6 IP
3
+59 dBm typical
7 Input VSWR 2:1 max
8 Harmonics -20 dBc min @ 120 Watts
9 Spurious Signals < -60 dBc typical @ 120
Watts
10 Input/Output Impedance 50 Ohms nominal
11 AC Input Power 1800 Watts Maximum
12 AC Input 180 – 240 VAC, single phase
13 RF Input 0 dBm max
14 RF Input Signal Format CW/AM/FM/PM/Pulse
15 Class of Operation Class A
Mechanical
16 Dimensions 19” x 5.25” x 24”
17 Weight 60 lb. max
18 RF Connectors Type-N
19 Grounding Chassis
20 Cooling Internal Forced Air
Environmental
21 Operating Temperature 0º C to +50º C
22 Operating Humidity 95% Non-condensing
23 Operating Altitude Up to 10,000’ Above Sea
Level
24 Shock and Vibration Normal Truck Transport
Approved By: ________________________________________________ Date: _____________________
MODEL 5225
80 - 1000 MHz
200 WATTS
LINEAR POWER RF AMPLIFIER
5200 Beethoven Street, Los Angeles, CA 90066
TEL: (310)306-5556 FAX: (310)821-7413
WEB: www.ophirrf.com

E-MAIL: [email protected]
Solid State
Broadband High Power
RF Amplifier
The 5225 is a 200 Watt
broadband amplifier that covers
the 80 – 1000 MHz frequency
range. This amplifier utilizes
Class A linear power devices that
provide an excellent 3
rd order
intercept point, high gain, and a
wide dynamic range.
Due to robust engineering and
employment of the most
a d v a n c e d d e v i c e s a n d
components, this amplifier
a c h i e v e s h i g h e f f i c i e n c y
operation with proven reliability,
Like all OPHIR
RF
amplifiers, the
5225 comes with an extended
multiyear warranty backed by
Ophir RF’s commitment to total
customer satisfaction.
◊ RE - Rear RF Connector model with Front Panel Controller Ethernet,
IEEE-488 and RS232
◊ FE - Front RF Connector model with Front Panel Controller Ethernet,
IEEE-488 and RS232
◊ R - Rear RF Connector model
◊ F - Front RF Connector model
ORDERING MODELS
Specifications subject to change without notice
FE MODEL SHOWN