Atec Ophir-5227 User Manual
Model 5227, Solid state broadband high power rf amplifier
MODEL 5227
80 - 1000 MHz
500 WATTS
LINEAR POWER RF AMPLIFIER
5200 Beethoven Street, Los Angeles, CA 90066
TEL: (310)306-5556
FAX: (310)821-7413
WEB: www.ophirrf.com
E-MAIL: [email protected]
Parameter
Specification @ 25º C
Electrical
1
Frequency Range
80 – 1000 MHz
2
Saturated Output Power
500 Watts Minimum
3
Power at P1
dB
350 Watts Minimum
4
Small Signal Gain
+58 dB Minimum
5
Gain Flatness
+ 4.0 dB Maximum
6 IP
3
+64 dBm typical
7
Input VSWR
2:1 max
8
Harmonics
-20 dBc Min @ 350 Watts
9
Spurious Signals
< -60 dBc typical @ 350 Watts
10
Input/Output Impedance
50 Ohms nominal
11
AC Input Power
5000 Watts Maximum
12
AC Input
180 – 240 VAC, single phase
13
RF Input
0 dBm max
14
RF Input Signal Format
CW/AM/FM/PM/Pulse
15
Class of Operation
Class A
Mechanical
16
Dimensions (3RU)
19” x 8.75” x 26”
17
Weight
100 lb. max
18 Connectors
Type-N
19
Grounding
Chassis
20
Cooling
Internal Forced Air
Environmental
21
Operating Temperature
0º C to +50º C
22
Operating Humidity
95% Non-condensing
23
Operating Altitude
Up to 10,000’ Above Sea
Level
24
Shock and Vibration
Normal Truck Transport
Solid State
Broadband High Power
RF Amplifier
The 5227 is a 500 Watt
broadband amplifier that covers
the 80 – 1000 MHz frequency
range. This amplifier utilizes
Class A linear power devices that
provide an excellent 3
rd
order
intercept point, high gain, and a
wide dynamic range.
Due to robust engineering and
employment of the most
a d v a n c e d d e v i c e s a n d
components, this amplifier
a c h i e v e s h i g h e f f i c i e n c y
operation with proven reliability,
Like all OPHIR
RF
amplifiers, the
5227 comes with an extended
multiyear warranty backed by
Ophir RF’s commitment to total
customer satisfaction.
10/12
Approved By: ________________________________________________ Date: _____________________
◊ RE
-
Rear RF Connector model with Front Panel Controller Ethernet,
IEEE-488 and RS232
◊ FE
-
Front RF Connector model with Front Panel Controller Ethernet,
IEEE-488 and RS232
◊ R
-
Rear RF Connector model
◊ F
-
Front RF Connector model
ORDERING MODELS
Specifications subject to change without notice
FE MODEL SHOWN