Atec IFI-T2618 Series - Manual (Page 2)

T2618
Series Medium to High Power Millimeter TWT Amplifiers
18.0 – 26.5 GHz • 10-200 watts, Minimum Rated Power
Specifications subject to change without notice Page 2 ds-t2618-series rev-a-3/18/2011
Internal Systems Diagnostics & Status Indicators
Filament/Beam Elapsed Time Metering in hours
RF Safety Interlock
Forward/Reflected Power Indication simultaneously on Front Panel display
Specifications:
Frequency Range: As Specified in Model Table
Rated Output Power: As Specified in Model Table
Gain @ Rated Power: As Specified in Model Table
Prime Power: As Required for Customer (Some are listed below)
Input/output Impedance: 50 ohms
RF Input/ Sample Connectors: Type K Female, unless specified otherwise
RF Output Connector:
WR42
Other waveguides available by request or specification (see Option 117)
Input VSWR: 2.0:1
Output VSWR: 2.5:1
Operating Temp: 0º to 50º C
Non-operating Temp/Altitude: -40º to 70º C (50,000 feet max)
Humidity: 95% without condensation
Operating Altitude: 10,000 feet
Cooling System: Air cooled, self-contained
Modulation: All types, AM, FM, Pulse
Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
Spurious Outputs: <-60 dBc nominal
Standard Prime Powers:
100, 115, 120 VAC ±10% 50/60 Hz, single phase
200, 220, 230, 240VAC ±10% 50/60 Hz, single phase
100/200VAC,115/208 or 200/220/230/240VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
Special Prime Powers other then listed are subject to availability
Some Available Options for IFI T2618 Series TWT Amplifiers
Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold
back the output power when the average reflected power exceeds a preset limit of 3.0:1.
The unit operates without damage or oscillation into any magnitude of phase or load impedance.
Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
Option 110-3 GPIB IEEE-488 and RS 485 Remote Control
Option 113: Chassis Slides for 19” Rack Mounting
Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
Option 123F or R: Reflected RF Sample Port -40, -50 or -60dB N or SMA, Front or Rear Panel