Atec Simplex-Swift-E - Manual

®
Insight Onsite
Overview
10kw, 15kw, 20kw
120/240vAC, 2/3-wire, single-phase
250w resolution
Description
Quick and easy testing of small
generators and AC power sources is
possible with the Simplex Swift-e.
Portable, fully self-contained, lightweight
and hand transportable, the Swift-e
can be used to test and maintain small
engine generators:
• Residential standby
• Contractor generators
• Marine generators
• RV generators
• Small wind turbines
The Swift-e is also suitable for other AC
power sources:
• 120/240v panelboards and distribution
• Inverters
• Small UPS
Swift-e’s are available in three versions:
• Swift-e: 10kw
• Swift-e+: 15kw
• Swift-e Ultra: 20kw
All versions are:
• Switchable in 250w steps
• 120/240vAC re-connectable
All control and cooling circuits operate
from the source under test. Digital test
instrumentation and connections cables
are included.
Instrument/Control Panel
Digital Power Meter:
• AC Voltage, 1/2%, + 1 digit
• AC Amperes, 1/2%, + 1 digit
• Frequency, 1/2%. + 1 digit
• KW, 1%, + 2 digits
• Power Factor, 2%, + 2 digits
Master load switch, applies all load
preset with load step toggle switches
Load step toggle switches
Fan/control power toggle switch
Ratings
Swift-e: 10,000 watts, 120/240V AC,
single-phase
Swift-e+: 15,000 watts, 120/240V AC,
single-phase
Swift-e Ultra: 20,000 watts, 120/240V AC,
single-phase
Features
Load elements: Sealed, tubular-
type element consisting of nichrome
resistance wire sealed within an incolloy
sheath (nickel alloy). Electrically dead
exterior of element reduces hazard
of electric shock and short circuit of
elements.
Element is rustproof, vibration and
shock proof.
Swift-e
Portable Load Bank
10kw, 15kw 20kw
Load control: Panel mounted toggle
switches for each load step and master
load control. Main contactor for master
load control/block loading.
Load element circuit protection: Main
circuit breaker with overload/short circuit
trips.
Overtemperature sensor to trip main
contactor and activate alarm indicator.
Overvoltage sensor to protect against
incorrect connection of load bank
(connection of 240V to 120V circuits).
Trips main contactor and activates alarm
indicator.
Connection cable set, 10’, with ring lug
terminations.
NEMA type 1 enclosure, aluminum
construction, powder coated nickel-
metallic. Includes rubber feet,
combination carry handles and cable
wrap.