Atec LeCroy-AP033 - Manual (Page 3)

AP033-OM-E Rev F ISSUED: October 2001
9 99 9–3 33 3
Specifications Specifications Specifications Specifications
TYPICAL ELECTRICAL CHARACTERISTICS
Typical characteristics are parameters with no guaranteed
performance. Tests for typical characteristics are not provided in
the Performance Verification Procedure.
Bandwidth, probe only
(-3 dB): DC to
≥
500 MHz
Risetime, probe only:
≤
700 ps (
÷
10 Attenuation)
≤
875 ps (
÷
1 Attenuation)
Residual Autobalance
Offset (Ref. to input) :
≤
100
µ
V (
÷
1 Attenuation)
≤
1.5 mV (
÷
10 Attenuation)
Differential Offset
Range:
±
400 mV (
÷
1 Attenuation)
±
4 V (
÷
10 Attenuation)
±
40 V (
÷
100 Attenuation
4
)
Input Resistance
(each side to ground): 1 M Ω
Input Capacitance
(between inputs):
≤
1.6 pF (
÷
10 Attenuation)
≤
3.1 pF (
÷
1 Attenuation)
Input Capacitance
(each side to ground):
≤
3 pF (
÷
10 Attenuation)
≤
6 pF (
÷
1 Attenuation)
Noise
(Referred to input,
5 to 1000 MHz): 6 nV/
√
Hz (
÷
1 Attenuation, 10X Gain)
10 nV/
√
Hz (
÷
1 Attenuation, 1X Gain)
60 nV/
√
Hz (
÷
10 Attenuation, 10X Gain)
115 nV/
√
Hz (
÷
10 Attenuation, 1X Gain)